With countless installations worldwide, Ruwac USA claims to be the leading manufacturer of immersion separators with its NA35 Series. Available in electric and air-powered models, these separators are the only immersion separators available on the market with a complete built-in vacuum system. Work environments using explosive, impact sensitive or glowing materials that may contain an ignition source such as aluminum, titanium, magnesium, zirconium, TNT and other volatile dusts will not only benefit from eliminating the risk of an explosion, but keeping workspaces clean in the process. The NA35 Immersion Separator collects explosive or glowing media particles entering the vacuum and immediately mixes them in a turbulent liquid bath. From there, moving air and liquid are rapidly forced onto the materials, submerging and neutralizing them in the process in the vacuum’s hydrophobic water filter system. This process stops already contained materials from finding any ignition source that may be introduced into the vacuum, guaranteeing a safe, explosion-proof work environment. The NA35 Series is available with a single or three phase electric motor or single air-powered venturi. It also includes an array of features such as a static conductive hose that easily disconnects to remove sludge and debris build up from inside the vacuum – eliminating any heavy lifting required to empty the vacuum. The hose also doubles as a second source for water level detection, on top of the vacuum’s external sight glass to monitor debris and fluid levels. For more information on Ruwac’s product lines, visit www.ruwac.com. You can also contact Ruwac by telephone at (413) 532-4030 or via e-mail, info@ruwac.com.