DTi Announces ADS-B Wire Protection Install Kit

With the FAA-mandated 2020 ADS-B upgrade fast approaching, Device Technologies, Inc. (DTi), a leading manufacturer of wire protection grommet edging, announces the availability of a NEW ADS-B Wire Protection Install Kit that includes its industry-preferred and FAA approved snap-on Spring-Fast M22529/2 grommet.

The Spring-Fast product line provides Best-in-Class EWIS Anti-Chafe Protection at half the cost of legacy systems. Spring-Fast grommets save 49% of total install costs by applying with finger pressure. No glue. No clean up. No curing.

DTi developed this install kit to facilitate the ADS-B upgrade and help MRO service centers and aircraft owners alike protect critical wires, their overall equipment investment and reduce AOG time due to its quick installation. This helps MROs lower cycle time and take on more ADS-B refit work.

FAA’s ADS-B (Automatic Dependent Surveillance-Broadcast) uses satellites instead of ground-based radar to determine aircraft location and is a key technology behind the FAA’s Next Generation Air Transportation System. The FAA has mandated installation of ADS-B OUT for flights after January 1, 2020, in airspace where a transponder is required today.

A picture containing bicycle, ground, floor, indoor

Description generated with very high confidenceAccording to DTi President and frequent flier, Nick Petri, “ADS-B is clearly a game changer with regards to CRM (cockpit resource management) and situation awareness. Our kit reduces ADS-B install time and ensures that wires are properly protected for years to come.”

The DTi Wire Protection Install Kit includes:

12 feet- Spring-Fast M22529/2 grommet
12 feet- PFA-PFW- 1 ¼” braided wrap wire sleeving
1 pair- 830 PS Full Bypass Shears
1 each- 860 GSB Cut to length bench mount measuring scale

Device Technologies, Inc is partnering with leading aircraft aftermarket distributor, EDMO for sale of DTi’s Wire Protection Install Kit. The kits are available in four standard sizes and can be customized for larger aircraft and length as required.

For ordering information, contact Ted Augustine, teda@edmo.com, 509-535-8280
About Device Technologies, Inc.

Founded in 1984, Device Technologies, Inc. (DTi) designs, manufactures, and sells specialty components including grommet edgings, enclosure seals, trims, and wire protection sleeving and EMI shielding/absorber/thermal materials for a broad spectrum of uses including aerospace and avionics OEM and MRO applications, Tactical Equipment, Wind Turbines, Telecom back up power systems, and IT Servers. DTi’s advanced protection materials have wide applications in other industries such as HVAC, Transportation, Medical, Military, Gaming, Automotive and Food Service Manufacturing.

DTi’s Advanced Technology Division (ATD) specializes in fully automated, linear and selective polymer coating for cable, wire, flat wire, stampings and profile metal-formed products encapsulated in a broad range of thermo-plastic and thermo-setting resins.

DTi continues to invest in R&D to enhance opportunities for its product and process technologies, in compliance with ISO 9001 and AS9100 standards. More information is available at www.devicetech.com or call (508-229-2000).

Spring Fast, Fast-Drop, Trim-Fast, Seal-Fast, Protect-Fast and Shield-Fast are registered trademarks of Device Technologies, Inc.